create sapscript from zebra label designer

Select the box for Use Printer Settings at the top left.

Set Paper Size to Width 2.25 x Height 2.00 Use the following settings for printing Labels: If still off center, make further changes and tests to the unprintable area settings until it centers. Under the Unprintable Area, change Left: to 0.25.Īfter the test is complete, go back into Design Manager and print another receipt. Go back to the Printing Preferences - Options tab. *NOTE: If the receipt is printing off center (left/right) make the following change: Print a test POS Invoice receipt in Design Manager. Once complete, be sure to right click on the Printer again and choose Printer Properties - choose to Print a Test Page. Set Paper Size to Width 4.00 x Height 4.00īe sure that the rotate180 degrees box is checked as well

Use the following settings for Receipt paper:.

Right click on the Printer and Choose Printer Preferences - Options tab.

Inside your computer, not Design Manager, Go to the Printer (Devices and Printers). Important: Always print a couple of Design Manager test labels and then test them using the Bar Code Scanner before printing a large run of labels. If the computer that is used to print the labels is also used for other printing then make sure that the correct printer is selected the next time you print a non-label document.ĥ. *Some versions of Windows do not have a default paper size and therefore the Setup button will need to be used every time labels are printed. These settings can be changed in the Start menu of your Windows operating system by selecting Printers and Devices. Printer Configuration: Please see below for the proper settings needed to print Receipts or Labels. The Use Receipt Printer box must be checked if you are printing receipts to the Zebra printer.Ĥ. Go to G/L - Company Information window -A/R/Showroom tab. The following setting must be changed in the Design Manager software if you are printing receipts using the Zebra printer. The Use Label Printer box must be checked if you are printing labels to the Zebra printer.ģ. Go to G/L - Company Information window - Inventory tab. The following setting must be changed in the Design Manager software if you are printing labels using the Zebra printer. In the Drop down for Driver find the GC420d (without the EPL)Ģ. Right click on the printer and choose Printer Properties. Go to the printer on your Computer - Devices/Printers. If this driver is the GC420d (EPL) driver, you MUST change this driver to the GC420d driver (name should not include EPL). Upon plugging the Zebra printer in, the computer may prompt you to download and install its own driver. **NOTE - If you are using the Zebra LP2844 or LP2824 printer, please see the following article here.ġ. *NOTE - This printer does not install on Mac computers. Setup and Installation for the Zebra Receipt/Label Printer Model # GC420d

Create sapscript from zebra label designer